A Sub-circuit is a stand alone circuit function consisting of a software module and schematic.

Below is a selection of sub-circuits available in the "C_LITE" library which comes with the lite version of QuickBuilder.

Communication sub-circuits

- AM RF Transponder
- AM RF Transmitter
- AM RF Receiver
- I2C slave RAM
- RS232

Data entry sub-circuits:

- Keypad 4 x 4 (low scan)
- Keypad 4 x 3 (low scan)
- Qwerty 36-keypad
- Keypad 16 x 4
- Keypad 4 x 3
- Keypad 4 x 3
- Keypad 4 x 3
- Push switch SPNO,PU

Display sub-circuits:

- LCD do matrix display 44780
- Display 6-dig 7-seg (com anode)
- Display 4-dig 7-seg (com anode)
- Display 2-dig 7-seg (com anode)
- I2C 4-Digit mux display

 

LED sub-circuits:

- LED Tri-colour (com anode)
- LED Flashing
- Bargraph x 8

- SPI FLASH 8-MBIT (AT45DB081B)
- I2C 8k-EEPROM+Loader (M2464)
- I2C 32k-EEPROM+Loader (M24256)
- SPI FLASH 512K (64kx8) M25P05
- I2C EEPROM 32768 Bytes
- I2C EEPROM 2048 Bytes

Miscellaneous sub-circuits:

- I2C card reader (ST14C02)
- I2C real time clock (PCF8593)
- Stepper motor MOSFET drive
- 1-bit port
- 2-bit port
- 3-bit port
- 4-bit port
- Piezo sounder (4 tones)
- LTC1286 12-bit A-D
- Relay 12V SP

Sensor sub-circuits:

- DS1820 Temperature sensor
- Rotary encoder (8-bit count)